Wireline vs. Wireless – Is there really a perfect access technology?

A recently published study (“Wireless Broadband Not a Viable Substitute for Wireline Broadband”) by Vantage Point was highlighted recently on the Telecom Blog. Some interesting comments, assumptions, and conclusions were made, which I feel can easily mislead the casual reader – and lead to an overly-sensitive buying process for companies looking for a new broadband…

A 16-minute demonstration of Bonded Internet™

[one_half valign=”top” animation=”fade_in”] [/one_half][one_half_last valign=”top” animation=”none”] Watch all of the videos here. We’re going to keep the text here short and sweet. Enjoy the video. If you’d like to discuss our software in more detail, please don’t hesitate to contact us. We’d be happy to discuss: Core and CPE Redundancy Suggested Hardware Vendors Site-to-site VPN…

Ease of Use Video Series #5

[one_half valign=”top” animation=”fade_in”] [/one_half][one_half_last valign=”top” animation=”none”] Video #5 -Applying Quality of Service In our final video of the series, we show you how and why to apply Quality of Service to our bond. We show how our system is designed to avoid high-latency and jitter for uninterrupted and un-disturbed transmission of real-time application packets. We’d…

Ease of Use Video Series #4

[one_half valign=”top” animation=”fade_in”] Next video: Applying Quality of Service [/one_half][one_half_last valign=”top” animation=”none”] Video #4 -Enabling Acceleration In this video we turn on our powerful compression/acceleration engine to show you how much increased performance we can get out of our bond. We initiate a file transfer of non-compressible data and see that our bond allows for…

Ease of Use Video Series #3

[one_half valign=”top” animation=”fade_in”] Next video: Enabling Acceleration [/one_half][one_half_last valign=”top” animation=”none”] Video #3 -Same IP Failover In this video we show how easy our system handles Same IP failover. After we’ve configured a bond, we simulate a sudden link failure by unplugging one of links from the CPE (customer premise equipment) using our Bonded Internet™. We…

Ease of Use Video Series #2

[one_half valign=”top” animation=”fade_in”] Next video: Same IP Failover [/one_half][one_half_last valign=”top” animation=”none”] Video #2 -Configuring a Bond In this video we show how easy it is in our system to activate a bond. After we’ve gathered intelligence from each link, we bond them together (link aggregation) using our Bonded Internet™ user interface. We then perform a…

Ease of Use Video Series #1

[one_half valign=”top” animation=”fade_in”] Next video: Configuring a Bond! [/one_half][one_half_last valign=”top” animation=”none”] Video #1 -Gathering Link Intelligence In this video, we explain how we gather behavioral information about each link in a Bonded Internet™ service. In this video, a customer has three Internet connections that we’re going to end up putting into a bond. But first,…